Galvanized plate/sheet
PRODUCTS

MESSAGE

SUBMIT

‹

›

‹

  • 20Mn / 1022 / SWRCH22K / C22(1.0402) Galvanized Plate/Sheet
  • 20Mn / 1022 / SWRCH22K / C22(1.0402) Galvanized Plate/Sheet
  • 20Mn / 1022 / SWRCH22K / C22(1.0402) Galvanized Plate/Sheet

›

20Mn / 1022 / SWRCH22K / C22(1.0402) Galvanized Plate/Sheet

20240306171717274.png

SEND
sale@quansteel.com
8615335229905

13.jpg

Parameter
Chemical Composition
Mechanical Properties
Product NameGalvanized steel plate/sheet
MaterialDx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,
SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ
CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer’s Requirement
Thickness0.12-6.00mm or customer's requirement
Width600mm-1500mm, according to customer's requirement
Zinc coated30g-275g/m2
Type of CoatingHot Dipped Galvanized Steel
Surface TreatmentPassivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U)
Surface StructureNormal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS)
StandardJIS 3302 / ASTM A653 /EN10143 AISI , ASTM , DIN , GB , JIS G3302 G3312 G3321 , BS
TechniqueHot Rolled / Cold Rolled
Product Application1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Delivery TimeUsually within 10-45 days after receipt of advance payment
CertificatesAPI ISO9001-2008,SGS.BV
bse metal typeGradeCHEMICAL COMPOSITION %
CSiMnP
cold rolled steel sheetDC51D+Z (St01Z, St02Z, St03Z) , DC51D+ZF≤0.10-≤0.50≤0.035
DC52D+Z (St04Z), DC52D+ZF≤0.08-≤0.45≤0.030
DC53D+Z (St05Z), DC53D+ZF≤0.08-≤0.40≤0.030
DC54D+Z (St06Z), DC54D+ZF≤0.01≤0.10≤0.30≤0.025
DC56D+Z (St07Z), DC56D+ZF≤0.01≤0.10≤0.30≤0.025
hot rolled steel sheetDD51D+Z (St01ZR, St02ZR)≤0.10-≤0.50≤0.035
DD54D+Z (St06ZR)≤0.01≤0.10≤0.30≤0.025
UsageGradeYield Strength (MPA)Tensile Strength (MPA)Elongation rate %
Punching galvanized steelDX51D+Z~270-500>=20
DX52D+Z140-300270-420>=22
DX53D+Z140-260270-380>=26
DX54D+Z140-220270-350>=30
Structure galvanized steelS220GD+Z>=220>=300>=18
S250GD+Z>=250>=330>=17
S280GD+Z>=280>=360>=16
S320GD+Z>=320>=390>=15
S350GD+Z>=350>=420>=14
S400GD+Z>=400>=470~
S500GD+Z>=500>=530~
S550GD+Z>=550>=560~

PRODUCT DISPLAY

  • 4.jpg
  • 3.jpg
  • 3.jpg
  • 4.jpg
  • 9.jpg
  • 7.jpg

STEEL STANDARDS AND GRADES

Chinese Standard

 Japanese Standard

European Standards

DX51D+Z/DC51D+Z (CR)

SGCC

DX51D+Z

DX52D+Z/DC52D+Z

SGCD1

DX52D+Z

DX53D+Z/DC53D+Z/DX54D+Z/DC54D+Z

SGCD2/SGCD3

DX53D+Z/DX54D+Z

S220/250/280/320/350/550GD+Z

SGC340/400/440/490/570

S220/250/280/320/350GD+Z

DX51D+Z/DD51D+Z (HR)

SGHC

DX51D+Z

ABOUT US

Our company has passed ISO9001 quality management system certification and CE certification, and our MTC is based on en10204-3.1 certificate. We support third-party detection such as SGS, BV and lloyd's.
The main products of the company are steel plate, pipe, coil, profile, copper, round steel, angle steel and channel steel, which are produced according to ASTM, JIS, DIN and BS standards. Products are exported to Europe, the Middle East, the United States, Southeast Asia and more than 50 countries and regions. We have our own factory to provide one-stop services for metal product cutting, forming and surface treatment. Covering an area of more than 1000 square meters, Jiangsu all steel suppliers have many years of experience in serving stainless steel, copper and carbon steel industries, including green energy, kitchen appliances, petrochemical, shipbuilding, automotive and construction industries, marine and other equipment, and medical treatment. Our products are widely used in heat exchange tubes, tableware and cooking appliances, steel rails, pressure vessels, petrochemical tanks, precision electronic instruments, solar water heaters, automotive industries, etc

  • 1.jpg
  • 2.jpg
  • 3.jpg
  • 4.jpg
  • 1 (2).jpg
  • 2 (2).jpg
  • 3 (2).jpg
  • 4 (2).jpg

WORKSHOP PACKAGING

Packaging and loading:

Packaging: According to customers' needs, use wrapping paper. If the transportation period exceeds 10 days or encounters special climate, we will use waterproof packaging and add plastic film to prevent moisture, water and rust.

Loading: We use the wooden pallet,triangular wood to fix the coil,and the steel wire rope to hold on the both side. That can prevent from the crush injury effectively.

未标题-1.jpg

FAQ

Q1:Do you provide samples? Is it free or extra?
A1:Yes, we can provide samples free of charge and the customer will pay the freight.
Q2:What if I don't have export experience ?
A2:We have reliable forwarder agent which can ship items to you by sea/air/Express to your doorstep. Any way, we will help you choose the most suitable shipping service.
Q3:How long is your lead time?
A3:If it is in stock, it is usually 5-10 days. Or, if there is no inventory, 15 days, depending on the quantity.
Q4:What are your terms of payment?
A4:30% T/T deposit in advance, 70% T/T balance within 5 days after B/L copy, 100%.Irrevocable L/C at sight, 100% Irrevocable L/C after receive B/L 30-120 days, O/A.
Q5:How is your technical support?
A5:We provide lifetime online support through Whatsapp/ Skype/ Wechat/ Email. Any problem after delivery, we will offer you call anytime.

MESSAGE

SEND

RELATED